1. Size. Before each package is designed, we must determine its size. When determining the size of the box, we need to look at the material used in the post-printing of the box, which is the paper thickness of the box. Most of them are corrugated and uncorrugated, corrugated, E tile is generally used, and general paper without corrugation is relatively thick. Therefore, before designing, the thickness of the paper must be determined, so as to scale the size. Do not design the good size, because the paper can not be loaded in the end.

2. Packaging boxes are also printed, so we need to design and typeset in vector software.

3. If the shape of the box is very special, then we must draw the knife line, and we must group all the knife lines together, because the printing factory makes the knife mold according to your knife line.

4. When we design the packaging, after the knife line is drawn, we generally print it out 1: 1, and simply fold a box to see if the size structure between the box cover, ears, etc. is reasonable.

5. The box is also a printed matter, so the pictures and graphics we use must be in CMYK color mode. The sharpness of the picture must be higher than 300 points, otherwise the finished product may be blurred.

6, the box will generally appear the following content (pictures of the product, the brand name of the product, the name of the product, a general introduction to the usefulness of the product, the barcode of the product, and the general introduction of the manufacturer)