The fiber laser cutting machine should pay attention to maintenance and maintenance in use, which is easily ignored by many users. In the end, it not only reduces the cutting accuracy and efficiency of the laser cutting machine, but also shortens the service life of the laser cutting machine. So here we suggest that you still pay attention to the maintenance of the fiber laser cutting machine, so how should we maintain and maintain the fiber laser cutting machine?

1. Always check the steel belt and make sure it is tight. The steel belt may seem like a small thing, but if it is not properly maintained at ordinary times, problems in work will lead to serious consequences.

2. Regularly check the straightness of the track and the verticality of the machine every six months. If it is found to be abnormal, it should be maintained and debugged in time. Otherwise, the cutting effect may not be very good, the error will increase, and the cutting quality will be affected. This is the most important and must be done.

3. Use a vacuum cleaner to absorb the dust and dirt in the machine once a week, and all electrical cabinets should be closed to prevent dust.

4. Each guide rail should be cleaned frequently to remove dust and other debris, to ensure that the normal rack of the equipment should be wiped frequently, and lubricating oil should be added to ensure lubrication without debris. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently, so that the machine can move better and cut more accurately, and the quality of the cut products will be improved. .

5. The dual focal length laser cutting head is a vulnerable item on the fiber laser cutting machine. Long-term use will cause damage to the laser cutting head. Regular inspections and maintenance are required. If there is deformation or other forms, then you should know that the laser cutting head is a little damaged and needs to be replaced. Failure to replace it will affect the cutting quality and increase the cost. Some products may require secondary processing, reducing production efficiency. The laser cutting head should be produced by a professional manufacturer, and it should be carefully checked when purchasing, so as to avoid problems when it is used.