The range of materials used in blister packaging is very wide. The packaging procedures for blister packaging materials and the quantity of products loaded into the outer packaging box should conform to the provisions in the corresponding product packaging technical standards and be firmly fixed to ensure that the products do not collide with each other. Pressure (cushion) of the fixed product should be coated with a corrugated cardboard (thick sheet package) or rigid foam plastic at the contact with the product, and be nailed to the raft with appropriate methods. How do blister-packed materials package the product?
The combination of the industrial adjustment of the packaging industry will be reflected more in the reduction of product consumption, structural optimization, improvement of varieties, improvement of quality and enhancement of competitiveness. Products that meet consumer upgrades, technological advancements, and sustainable development will accelerate growth. China will pay sufficient attention to the import of high-end packaging raw materials and high-end machinery and equipment.
Blister is a plastic processing technology, the main principle is to flatten the plastic hard sheet heating soft, vacuum adsorption on the mold surface, after cooling molding, widely used in plastic packaging, lighting, advertising, decoration and other industries. The use of plastic box technology to produce plastic products, and use the corresponding equipment to the product of the general package. Blister packaging products include: blister, tray, blister box, synonym: vacuum cover, blisters and so on. The main advantages are: saving raw and auxiliary materials, light weight, convenient transportation, good sealing performance, meeting the requirements of environmental protection green packaging; packaging any special-shaped products, packing without additional buffering materials; packaging products transparent and visible, beautiful appearance, convenient Sales, and suitable for mechanization, automated packaging, easy modernization, saving manpower and improving efficiency
Unpackaged products should be stored in a rain-proof, ventilated, and dry place. And pad the product well to prevent moisture and damage. Products must be inspected by the quality inspection department and must be accompanied by product certification. Products must be inspected by packaging inspectors before packaging. The dust and other dirt on the product before packaging must be removed. The entire packaging process must be cleaned to ensure the quality of the package. Explosion-proof electrical products and power transmission control devices shall be covered with plastic bags and then put into the packaging box. The outer packaging shall be a simple packaged product and shall be packed in plastic bags first.
According to the requirements or sample specifications, the first to make a plastic mold, under normal conditions, are used to make blister plastic packaging mold, but also useful for wood carving and metal engraving products for mold, plaster mold after the first, let it dry naturally Completely or dry, and then according to the product surface convex and concave specific circumstances, with 1-2 mm drill spent in the product does not affect the shape of the package to drill a lot of small holes, if it is a box like products, but also in the four surrounding Drill some small holes so that when the plastic production is conducted, the air can be pumped out. After the holes are drilled in the mold, the plaster molds are hardened. The hardened processing method is to dry after soaking in the alum saturated liquid.
Shenzhen Xin Hong Yang Packing Co., Ltd., engaged in plastic box customization. Plastic box manufacturer which is better? To find plastic box custom manufacturers, choose Shenzhen Xin Hong Yang Packing Co., Ltd., high-quality transparent plastic box, large output, fast delivery, rapid delivery, quality assurance. Phone: +8613554903780 Fax: +86-755-85207250 E-mail: sales@xhypackaging.com Website: http://www.packaging-box-suppliers.com/