PET material

PET material is an environmentally friendly material, with high barrier properties, light weight, non-breaking properties, chemical resistance, and strong transparency. It can be made into pearlescent, colored, magnetic white, and transparent. It is widely used in gel water. The bottle mouth is generally standard 16#, 18#, 22#, 24# diameter, which can be used with a pump head.

acrylic material

The acrylic material is an injection-molded bottle, which has poor chemical resistance. Generally, the paste cannot be directly filled. It needs to be equipped with an inner liner to block it. Cracks, high packaging requirements during transportation, because it looks particularly obvious after scratches, has high permeability, and feels extra thick on the upper wall, but the price is quite expensive.

AS, ABS

AS, ABS: AS transparency is better than ABS, and toughness is better.

The order quantity is generally 10,000 pieces, and the color can be customized. Usually, the primary color frosted and magnetic white are mainly used, or the effect of pearl powder is added. Although the bottle and the cap are matched with the same color masterbatch, sometimes due to the different materials used for the bottle and the cap , showing some differences in color.

UV ink

There are ordinary ink and UV ink for silk screen printing. UV ink has better effect, gloss and three-dimensional effect. During production, the color should be confirmed by printing first, and the screen printing effect of different materials will be different.
The processing technology of bronzing and silvering is different from that of printing gold powder and silver powder. The hard material and smooth surface are more suitable for bronzing and silvering. The soft surface has poor hot-stamping effect and is easy to fall off. In gold and silver.

The screen printing film should produce negative film, the graphic effect should be black, the background color should be transparent, and the hot stamping and silver gilding process should produce positive film, the graphic effect should be transparent, and the background color should be black. The proportion of text and patterns should not be too small or too thin, otherwise the effect will not be printed.

Bottle caps are generally equipped with inner gaskets, pull caps and inner plugs, and very few are equipped with spoons or droppers, which are mainly due to their tightness and convenience of use.

The production cycle is relatively moderate, about 15 days. The screen printing cylindrical bottle is calculated as a single color, and the flat bottle or special-shaped bottle is calculated according to two-color or multi-color. Usually, the first screen printing fee or fixture fee is charged.