Packaging is an auxiliary product with a beautification function. To produce a perfect plastic packaging product, we must have the ability to produce beautifying packaging. This is a test of packaging production for the engineering department of the plastic injection factory. There is a certain degree of production. For the plastics factory with experience and production capacity, the difficulty will only be settled for a while. Getting rid of difficulties is the most important issue. For a plastic packaging plant, there are corresponding countermeasures for such problems.

Before packaging production, before the production of the plastic factory, it is mainly to check the design of materials, products, production of molds, equipment and so on. A number of process inspections, the problems that arise before production are the surface quality of the material is not qualified, design defects, mold edges, equipment abnormalities, a variety of problems before production.

The corresponding skills of the plastic factory, if the material is unqualified, it is necessary to check the material before the receipt of materials for inspection or production.

The design defect is the most serious thing in the packaging. The design is the layout of the packaging production. The rational packaging design is not enough for the production of good packaging. This is the industry terminology. The design flaw is not completely sorted out. Generally, the plastic factory is like this. We must first discuss with customers the complete and combing process of packaging design, and come to the conclusion that the perfect packaging, packaging design is still mainly based on consumer psychology and

.

The lack of edge of the mold, the mold is the main props before the production, the mold edge will lead to the production of a large number of defective products, this problem will generally appear when the product is hiccups, the product of the diagonal part of the cable, if not found There will be a solid point when electroplated out. This kind of problem occurs from time to time in the plastic factory. The main countermeasure is to check the whole sample during the snoring.

Abnormal equipment, plastic factory is a mechanized production plant, at any time there will be mechanical failure, mechanical anomalies should not occur when the plastic blister packaging plant electrical equipment on time to conduct an overall inspection to identify problems Immediately solve this problem before production, a variety of abnormalities in the machine may threaten the safety of the plastics factory production personnel.