PET anti-static plastic disc as a manufacturing equipment, has been used in the electronic IT industry for many years. PET plastic trays have been seen by many people, this is a transparent plastic tray, and then is the rare PET plastic box other colors. Whether they are transparent or colored, they are all made from the same raw materials. PET is a new type of environmental protection material because of its molecular composition and its easy degradation. In today's increasingly focused on health and the environment today. Environmental protection, environmental protection, and environmental protection packaging are all being promoted. Therefore, PET environmental protection plastic box is a non-polluting material that can be recycled.
PET anti-static plastic, but also a kind of PET plastic, but this plastic than the ordinary PET a layer of conductive layer, according to the different anti-static index. Generally divided into three levels: conductive plastic, semi-conductive plastic, anti-static plastic tray. There are subtle differences between the material formulations involved and the post-processing production. Some electronics factory products are packed out of the blister trays, if their plastic trays are no longer recycled. Therefore, the material of such a blister disc may not be too thick, which can reduce a part of the cost, and because it is a one-time use, there is no strict requirement on the time-effect of the conductivity index. However, if it is used multiple times in a cycle, consider the wear during prolonged use and anti-static attenuation. Therefore, the use of materials on the need to be very particular about, some plant a plastic tray can be used for a few years. If the blister is too thin, after a severe working environment, after multiple shipments, or falling, the probability of breakage of the plastic tray will be greatly increased. Therefore, such plastic trays must use PET material with a low mass density, which is related to the adjustment of raw material suppliers.
One of the most important PET anti-static plastic discs is the surface treatment of PET in the surface layer, and it may also be the final process of PET film raw materials. Without this surface treatment, PET will not have an anti-static index, which is no different from ordinary plastic boxes. It also cannot protect electronic chips from static electricity breakdown. PET anti-static plastic blister is different from PS anti-static plastic blister, because in the surface treatment, after treatment, after a few hundred baidu high temperature will let anti-static decay, in special working environment, such as too cold, overheated, too wet State. Whether it can guarantee the stability of the surface conductivity index, which will be related to the quality of the plastic tray is the simplest test.
Shenzhen Xin Hong Yang Packing Co., Ltd., engaged in plastic box customization. Plastic box manufacturer which is better? To find plastic box custom manufacturers, choose Shenzhen Xin Hong Yang Packing Co., Ltd., high-quality transparent plastic box, large output, fast delivery, rapid delivery, quality assurance. Phone: +8613554903780 Fax: +86-755-85207250 E-mail: sales@xhypackaging.com Website: http://www.packaging-box-suppliers.com/